Dead Air Wolverine Tool

Silencers can be threaded directly to the barrel or to a quick detach (QD) mounting system.

Traditional centerfire silencers require little maintenance. High-flow suppressors should be cleaned every few thousand rounds to maintain performance. Rimfire suppressors get very dirty and need to be cleaned every few hundred rounds for optimal performance.

Hub Mount is an industry-standard rear thread pitch for suppressors. The HUB mount is 1.375x24 (1 3/8x24) and can accept any muzzle device in that thread pattern, regardless of the brand.

We have used CAT206 (ONLY for titanium and Inconel silencers), HUXWRX Suppressor Sauce, and MIL-COMM Suppressor X with excellent results in cleaning your suppressor.

A QD mounting system allows you to quickly and easily install or remove your suppressor across multiple firearms equipped with the QD mount. The adapter attaches to the suppressor's rear threads and mounts to the muzzle device specific to that system, i.e., Dead Air Keymo adapters mount the Keymo pattern muzzle devices.

Many sealed rifle and pistol silencers do not require frequent cleaning, but you can use cleaning solvents to keep them performing at their peak.

Direct thread silencers screw directly onto the muzzle threads of a firearm, making it the simplest mounting system and saving on added weight and length. QD systems include provisions to attach the silencer faster, have a more secure attachment, and move the silencer easily to different guns.

No, modern cleaning solvents like CAT206 (ONLY for titanium and inconel silencers) or HUXWRX Suppressor Sauce allow you to submerge your silencer without neeing to disassemble it. NOTE: Silencer parts like o-rings, gaskets, wipes, or other non-metal parts need to be removed before cleaning.

Direct thread systems are generally lighter and shorter than QD systems, making your setup more compact and maneuverable. QD systems provide very secure attachment and the ability to easily swap the suppressor to different hosts. 

A pistol booster system is designed to allow tilting barrel pistols (Glock, Sig, Walther, M&P, etc.) to cycle properly with an attached silencer. They work by decoupling the weight using a spring and attach to your threaded pistol barrel using a piston.